A tune is weeks of work. Losing it to an overwritten file, a forgotten change or a test map left in the car is painful, and so is not knowing what changed between a good drive and a bad one. RM-Tuner keeps every save's previous version, lets you write notes and a checklist beside each tune, and compares any two tunes cell by cell. This page explains how tunes are stored in the ECU and on the computer, and how to work safely with them.
A tune exists in three places, and it helps to keep them apart:
| Where | What it is |
|---|---|
| The ECU's working memory | What the engine is running right now. Every change you make in RM-Tuner goes here at once, so you can tune with the engine running |
| The ECU's stored settings | What the ECU starts with at the next key-on. Store all copies the working memory here; with Auto-store on, RM-Tuner does it for you |
| A tune file on your computer | A .dat file you open and save with the File menu: your backup and your history |
The toolbar shows which you are working on: File editing without an ECU, ECU Online when connected. A change not yet stored is marked, so you can see what would be lost at key-off.
File → Save writes the tune to its file; Save as… to a new one. Every time you save over an existing tune, RM-Tuner keeps the previous version in a .history folder beside it.
File → Saved versions… lists the previous saves. Open a copy opens one to look at or edit, leaving your current tune and its history untouched; Compare compares it with the tune you have open.
Save the ECU's tune to a file before you change anything on a new car, and save a new file at the end of every session. You can always go back to a version that worked.
File → Tune notes and checklist… keeps notes and a to-do list with the tune file: what you changed and why, the fuel it runs on, what is left to tune ("check cold start below 5 °C", "log knock at 6000 rpm"). The notes are saved beside the tune, so they travel with it. Save the tune to a file first.
The Compare menu shows how your tune differs from another:
| Command | What it does |
|---|---|
| Compare with file… | Compares the tune you have open with another tune file |
| Compare with last save | Compares it with the last time you saved it: everything changed since |
| Show differences… | Lists every changed setting and table cell, as the current value minus the reference |
| Clear comparison | Ends the comparison |
While a comparison is on, the tables colour each cell against the reference: blue where your value is lower, red where it is higher, and the 3D view shows the reference as a dashed surface. Live data is left out of the comparison.
Using it. After a session, Compare with last save shows exactly what you changed. When a car runs worse than last week, compare this week's tune with last week's: the difference is the first place to look.
| Command | What it does |
|---|---|
| Store all changes | Stores the working memory in the ECU, as Store all does |
| Load stored settings… | Throws away the changes not yet stored and goes back to what the ECU has stored. RM-Tuner asks first when there is something to lose |
| Write tune file to ECU… | Writes a whole tune file to the ECU and stores all of it. If the tune you have open has unsaved edits, you can save them first or leave them out |
Write tune file to ECU replaces everything in the ECU. Save the ECU's own tune to a file first, and make sure the file is meant for this engine: a tune for another engine's injectors, trigger or firing order can stop the engine starting or damage it.
Only the changes you have not stored. With Auto-store on, RM-Tuner stores them for you; otherwise press Store all before switching off.
File → Saved versions… lists the previous saves of the tune; open a copy of the one you want and save it under a new name.
Open one, then Compare → Compare with file… and choose the other. The tables colour the differences, and Show differences… lists them all.
Yes: open a tune file and RM-Tuner works in File editing mode. Write it to the ECU later with Write tune file to ECU….
Contact customer support at [email protected].
Related pages: Download RM-Tuner · First start · Firmware update · Datalogging