RM-Tuner is the free software for the RM-Primis ECU: you set up the engine, tune the fuel and ignition, calibrate sensors, log and analyse data, and update the ECU's firmware with it. It connects to the ECU over USB, and works on a tune file without an ECU too.
Download RM-Tuner latest version
The download also contains a generic basemap: a starting tune to open in RM-Tuner.
| Rail on the left | The sections: Tune, Setup, I/O, Safety, Analyze, Scope and Diag |
| Menu | The pages of the section; Filter narrows it, Favourites keeps the pages you use most |
| Search (Ctrl+K) | Finds any page or setting by name |
| Store all | Stores every change in the ECU's memory. With Auto-store on, RM-Tuner does it for you |
| Start log | Records a datalog |
| Live gauges | The engine's main readings, always at the bottom of the window |
| ? beside a setting | A short explanation of it |
To open the live data and the log beside a table, choose a layout for dyno work, switch to the light appearance or learn the keyboard shortcuts, see Customising RM-Tuner.
RM-Tuner checks for a new version when it starts, and offers to install it. Help → Check for updates asks at any time. The ECU's firmware is updated from RM-Tuner too: see Firmware update and recovery.
Yes. RM-Tuner is free to download and use with the RM-Primis ECU.
Yes. Open a tune file with File → Open: RM-Tuner edits it in file editing mode, and you can send it to an ECU later.
Check the USB cable and the ignition is on, and install the USB drivers again (video above). Only one program can use the ECU's port at a time.
Contact customer support at [email protected].
Related pages: Getting started · Customising RM-Tuner · Firmware update and recovery · Wiring diagram